Oil Spot Sealer
COMPOSITION
TA-100 is a specially blended acrylic copolymer emulsion designed to seal oil and gas contaminated areas and to improve adhesion of Poly-Kote TA-1000. TA-100 is designed for use on asphalt surfaces. TA-100 is available at many Graniterock branch locations.
SURFACE PREPARATION
Gas, grease, and oil spots shall be cleaned by scrapers, and/or suitable detergents.
Note: Gas and oil contaminated areas that are “heavily soiled” or “soft” may require removal, and replaced with “hot mix” asphalt!
APPLICATION
Mix well before using. TA-100 may be used full strength as received. On lighter contaminated areas TA-100 may be diluted 1:1 with potable water. Sprinkle (lightly) a 20 or 30 mesh sand onto TA-100 prior to curing to improve adhesion of Poly-Kote TA-1000.
COVERAGE
Depends on surface texture being treated. For estimating purposes, medium textured surfaces require approximately 0.1 (1⁄10) gallon per square yard.
CLEAN UP
Water can be used to clean TA-100 from tools and equipment prior to drying. Use a scraper or wire brush to remove dried product.
PACKAGING
TA-100 is available in 55 gallon drum or 5 gallon pail.
PRECAUTIONS
TA-100 is a specially blended acrylic copolymer emulsion designed to seal oil and gas contaminated areas and to improve adhesion of Poly-Kote TA-1000. TA-100 is designed for use on asphalt surfaces. TA-100 is available at many Graniterock branch locations.
SURFACE PREPARATION
Gas, grease, and oil spots shall be cleaned by scrapers, and/or suitable detergents.
Note: Gas and oil contaminated areas that are “heavily soiled” or “soft” may require removal, and replaced with “hot mix” asphalt!
APPLICATION
Mix well before using. TA-100 may be used full strength as received. On lighter contaminated areas TA-100 may be diluted 1:1 with potable water. Sprinkle (lightly) a 20 or 30 mesh sand onto TA-100 prior to curing to improve adhesion of Poly-Kote TA-1000.
COVERAGE
Depends on surface texture being treated. For estimating purposes, medium textured surfaces require approximately 0.1 (1⁄10) gallon per square yard.
CLEAN UP
Water can be used to clean TA-100 from tools and equipment prior to drying. Use a scraper or wire brush to remove dried product.
PACKAGING
TA-100 is available in 55 gallon drum or 5 gallon pail.
PRECAUTIONS
- Air temperature shall be 50°F. and rising, prior to application.
- TA-100 shall not be applied during, or when rain is imminent.
- Do not store in temperatures exceeding 100°F.
- Protect containers from direct sunlight.
- Keep away from children.
- Protect from freezing.